How to clean and maintain the cross-flow fan!

The cross-flow fan is a type of fan with very good functions. It is widely used in many places. After using the cross-flow fan for a long time, some problems will definitely occur. At this time, timely cleaning is required to ensure cross-flow. The normal use of the fan, so I will introduce you to this situation today.

Cross-flow fan cleaning:

    Gently unplug the power supply of the cross-flow fan to achieve mechanical and electrical separation. Be careful when unplugging the power supply. Dilute the neutral detergent with a small amount of warm water or prepare a little light soapy water. If it is oily, use hot water and detergent. Add a little detergent, and hot water must be used here. Loosen the front and rear screws, and gently remove the rear cover of the Masano exhaust fan. Pull out the connector of the exhaust fan, and remove the filter and the rear cover together. Do not touch them together.

    Put the filter and the back cover into the container, wash it for 10-15 minutes and then replace it with clean water. Do not immerse the small motor in water, and do not rinse the small motor with water. Wipe the cleaned fan blades and inner wall with clean water. Reinstall the filter and the rear cover. The distance should not be too close, and air circulation and humidity should be balanced. If necessary, you can consider using some dehumidifiers or dehumidification facilities. When filling the water cooling device, use pure water as much as possible. After cleaning, add a few drops of engine oil to the oil hole of the motor casing.

Maintenance of cross-flow fan:

    Do not switch frequently. Avoid high temperatures and direct sunlight to avoid deformation of the leaves. Regularly remove the oil stains, remove the oil stains on the wind blades, shutters and panels, and do not use corrosive chemical solutions when cleaning, otherwise it will easily damage the plastic parts and the outer paint. Fill the motor regularly with lubricant. When reinstalling after cleaning, the fan blade nut must be tightened to prevent the fan blade from rotating and flying out after being energized, and accidents may occur. The filter-type fan should also clean the filter grid regularly, if the activated carbon grid must be dried, otherwise it will affect the filtering effect. The water in the sink should be added frequently to keep it at a safe level, and it should be replaced regularly.

    After a long period of operation, the air volume and cooling effect of the filter screen and air curtain will be affected due to the blockage of dust and dirt. It is best to clean it every two weeks. The distance should not be too close, and air circulation and humidity should be balanced. If necessary, consider using some dehumidifiers or dehumidification facilities. The cross-flow fan should be used strictly in accordance with the product instruction manual, and regular professionals should be cleaned and inspected regularly to extend the life of the fan.

    The above is the method of cleaning and maintenance of the cross-flow fan introduced by everyone. I hope you can use it as a reference to understand. When using a cross-flow fan, reasonable cleaning is very important. I hope you can refer to the above to introduce to you These methods are used to reasonably clean the cross-flow fan, making our fans more convenient to use.