Brushless DC pump installation instructions

how to install? Usually the pump shaft is fixed horizontally and the water outlet is vertically upward.

Only DC power supply is available, and batteries, solar panels, switching power supplies, and power adapters can be used. DC direct current is strictly distinguished between positive and negative, please pay attention to the correct connection of the input line, the red line is positive. The black wire is the negative pole, and it is strictly prohibited to reverse the positive and negative poles.

It is recommended that the pump be installed on a rubber anti-vibration pad, which can vibrate when the pump is running, thereby reducing noise.

It is recommended to choose a silicone or plastic hose of appropriate size as the inlet and outlet pipes to avoid any particles from entering the brushless DC pump body.

When using, the liquid should be free of debris, so as not to block the rotor operation, and please pay attention to the temperature of the liquid and the temperature of the use environment. Using the pump beyond the limit temperature will cause the life of the pump to be shortened. The use of liquids with magnetic particles is strictly prohibited.

Brushless DC pumps need to be used away from magnetic objects.

Brushless DC pumps are strictly prohibited from idling without water for a long time, not dry pumping, and no self-priming function.

Before use, pay attention to the three types of brushless DC pumps: A non-submersible pumps, which are used on land only; B submersible pumps, which are both amphibious and can be used on land and water; C submersible pumps, which are only used on water.