How to solve the left and right swing of the wind wheel of the cross-flow fan?

The side-to-side swing of the cross-flow fan rotor can be caused by a variety of reasons. The following are possible solutions:

1. Pinecone installation position: The left and right swing of the wind wheel may be caused by the unstable installation position of the cross-flow fan. Make sure the cross-flow fan is mounted on a sturdy support with no loose screws or connections.

2. Adjust the position of the wind wheel: If the cross-flow fan wind wheel swings because its position is incorrect, you can try to reinstall the wind wheel. By adjusting the position of the wind wheel, the vibration and swing of the wind wheel can be reduced.

3. Check the rotor blades: If the cross-flow fan rotor swings due to damage or deformation of the rotor blades, the blades need to be replaced or repaired. Make sure that all blades are balanced and that the distance between blades is even.

4. Adjust the bearing of the wind wheel: If the swing of the cross-flow fan is caused by damage or wear of the bearing, the bearing needs to be replaced or repaired. Make sure the bearings are solid and not loose or worn.

5. Adjust the drive system: The swing of the cross-flow fan rotor may be caused by the instability or damage of the drive system. Check all connections and components of the drive system and make sure they are tight and functioning properly.

Note that these solutions may not work in all situations. If you are unsure how to fix a penetrating blower rotor flapping problem, please contact a professional technician for inspection and repair.

Cross-flow fan, , oven motor, disinfection cabinet fan, high temperature resistant fan, cooling fan, air curtain fan, heater fan, electric oven fan, heating furnace fan, air-conditioning fan, clothes rack fan