The role of wave pumps and submersible pumps

Wave pumps and submersible pumps are basically the same thing, both in the category of submersible pumps, but they have different functions and methods in use.

The role of the wave pump:

Function one:

Wave-making pumps should be widely used in large-scale fish breeding. Using wave-making pumps can create artificial currents and waves, allowing fish to grow in a river-like environment. Fish will move against the current in a water-flow environment and swim freely. The amount of dissolved oxygen is greatly increased, and the microorganisms in the water can fully communicate, which is beneficial to the growth and development of fish. It is worth noting that the flow rate of the pump should be reasonably selected, too large or too small is not suitable. In addition, the water inlet should be well protected, otherwise it is easy to suck the fish and cause serious injury. Moreover, after the sucked fish blocks the water inlet , Cause the water pump to run idly, easily burn the motor, and cause leakage.

Function two:

Through the function of the wave-making pump, the water flow in the fish tank can form a large water flow and a large circulation, which is conducive to stabilizing the water quality. That is to say, as mentioned earlier, it is conducive to the full exchange of microorganisms in the water and the stability of water quality, and the stability of water quality is very critical.

Function three:

Through the function of the wave-making pump, it can assist in realizing the effect of accelerating the flow of fish feces to the suction port of the water pump until the effect of sucking feces.

Then to achieve the above three effects, the location of the wave-making pump is very important. Combining the guidance of the predecessors and my long-term practice, the position of the wave-making pump should only be placed on the upper part of the same side of the water pump (lower bucket), 5 meters away from the water surface. A distance of one centimeter and the pump head blowing slightly downward can make the water flow in the tank form a "U"-shaped cycle. At the same time, the wave-making pump must be turned on for a long time or have enough time every day to fully function.

The role of the submersible pump:

The submersible pump is generally installed in the fish tank as the water exchange of the filter device. Its function is to lift the fish tank to the filter tank, then pass through various areas of the filter tank, and then return to the fish tank until the function of circulation.

When the submersible pump is used as a filter, the flow rate should be 3 to 5 times the total volume of the fish tank. For example, for an aquarium with a capacity of 100 liters of water, it is better to choose a submersible pump with a flow rate of 300 liters/hour. Protection is required, and a larger mesh isolation port is set to prevent fish from being sucked.

DC brushless water pump, water heating mattress water pump, foot bath water pump, dishwasher water pump, intelligent toilet water pump, bath machine water pump, water heater water pump