What is the brushless stator winding mode of the pump

Brushless motor is often used in the pump industry, different pump motor, stator design shape is different, winding way is also slightly

Different, then Canghai cross - flow brushless motor is mainly divided into what winding mode? Now I will give you a brief introduction.

Water pump brushless motor according to the different direction of stator notch, there are two common winding methods, fly-fork outside winding and needle inside winding, respectively corresponding to automatic fly-fork winding machine and automatic needle inside winding machine.

1, like water purifier, fish tank oxygen pump and other small water pump brushless motor, generally small outside diameter, line diameter is relatively small, stator mostly notch inward, commonly used needle winding machine to solve the winding problem, considering the winding is more economic and fast, commonly used four station or six station high-speed winding machine equipment, one time out of four or leave a stator product, efficiency is greatly improved. It should be noted that, because of the high speed, we must debug well and control the speed reasonably.

2, some automobile pump motor, stator notch is outgoing, commonly used fly-fork outside winding machine to complete the winding work, because the enamelled wire diameter is thicker, some even more than 2mm, so you need to use special winding equipment, some also need to use non-standard equipment, relatively high requirements.

3, there are some conventional pump motor, you can use ordinary equipment to wind, according to the different choice of the product flying fork and needle winding way can be.

According to the different winding way, choose reasonable equipment, in order to make the production achieve twice the result with half the effort.

Dc brushless water pump, water heating mattress pump, foot bath pump, dishwasher pump, smart toilet pump, bath pump, water heater pump