Intelligent toilet how to install booster pump booster pump installation precautions

The existence of intelligent toilet will bring a lot of convenience to people's life, and in life will also give you more influence, of course, there will be a lot of problems in the process of using the intelligent toilet, the installation of the booster pump actually has a great role in the use of the intelligent toilet, so in many times we must know how to install the smart toilet booster pump and the installation precautions of the booster pump, Let's get to know each other.

How to install booster pump in intelligent toilet

It is necessary to ensure that it is installed in a vertical or horizontal way. The direction of the water flow needs to be consistent with the direction of the arrow displayed on the pump body. The booster pump should be installed in a position close to the water level as far as possible.

1, before installation, we need to carry out a detailed inspection of each part of it, whether the parts are closely connected, whether there is loosening phenomenon, whether there is foreign body blockage in the flow channel of the pump body, so as not to be able to clean up the situation at the time of late installation. When installing, we need to ensure that it is installed in a vertical or horizontal way, the direction of the water flow needs to be consistent with the direction of the arrow displayed on the pump body, and the booster pump should be installed in a position close to the water level as far as possible.

2, if conditions permit, it is recommended that you had better add a valve at home, the purpose of doing so is to facilitate future maintenance. In addition, we also need to install a pressure gauge outside the pump outlet, which can facilitate us to check the use of the booster pump in the rated head and flow range, so that it can effectively extend the service life of the booster pump.

Precautions for installation of booster pump

1, in the installation, we need to follow the correct installation sequence and the relevant installation standards, it must be installed according to the "installation mode" display horizontal or vertical installation. When the suction level is lower than the impeller end face of the household booster pump or the pump shaft around, the household booster pump should be installed with the upper return valve, the outlet end is connected with a tee for water diversion, in a use should be filled with water to the pump, and the screw tight.

2, the connection between the pipelines should be close, not loose phenomenon, especially the water inlet can not appear leakage phenomenon, but it will reduce the head of the pump or the phenomenon of pumping water. Household booster pump chamber shows water before, do not turn for a long time, so as not to damage the seal. In order to ensure our safety, we recommend that you must use a three-core safety socket with ground wire.

The above content is particularly familiar to everyone. Of course, in the process of using the toilet, we must understand some phases of the intelligent toilet

Dc brushless water pump, water heating mattress pump, foot bath pump, dishwasher pump, smart toilet pump, bath pump, water heater pump